top of page

Custom Jewelry CAD Approval Checklist Before Sampling

Writer: Dciya Jewelry
Dciya Jewelry
Oct 29
4 min read
Jewelry designer and factory technician reviewing a custom jewelry CAD design

Approving a jewelry CAD is not only about deciding whether the rendered image looks attractive. A custom jewelry CAD approval checklist should confirm the dimensions, construction, stone settings, connections and estimated weight before the factory produces the mold and physical sample.

Once the CAD is approved, significant changes may require a revised CAD, new mold or another sample. Careful review at this stage helps the buyer avoid unnecessary cost and delay.

Why Use a Custom Jewelry CAD Approval Checklist?

A CAD rendering may look similar to the original reference image while containing important technical differences.

For example:

  • A pendant may be thicker than expected.

  • A ring band may be wider from the side.

  • A stone may appear smaller after secure prongs are added.

  • An opening may be too small for the required chain.

  • A decorative area may be changed from openwork to solid metal.

  • An adjustable ring may be converted into a fixed-size ring.

The buyer should therefore review both the appearance and the construction.

If the project begins from an AI image, read Can a Jewelry Factory Manufacture AI-Generated Jewelry Designs? before approving the CAD.

1. Confirm the Overall Dimensions

The CAD should clearly show the product’s:

  • Height

  • Width

  • Thickness

  • Stone dimensions

  • Bail or connection opening

  • Ring size or internal diameter

  • Chain or component dimensions

Do not rely only on how large the design appears on the screen. A rendered pendant can look substantial when enlarged on a computer but appear much smaller when manufactured at 14 mm.

If possible, compare the stated dimensions with an existing piece of jewelry or print the front view at actual size.

2. Review the Front, Side and Back

A front view cannot show the complete structure.

The side and back views should be checked for:

  • Setting height

  • Back openings

  • Sharp corners

  • Wall thickness

  • Soldering areas

  • Stone depth

  • Logo position

  • Skin-contact surfaces

The back structure can influence weight, comfort, polishing and production cost. A completely solid back may be heavier than necessary, while an overly open structure may be weak or difficult to finish.

3. Check the Metal Thickness

Thin areas may look delicate in a rendering but may deform during casting, polishing, setting or daily wear.

Ask the factory to identify:

  • The thinnest metal areas

  • Ring-band thickness

  • Pendant edge thickness

  • Prong dimensions

  • Connection-point thickness

  • Areas likely to lose material during polishing

The correct thickness depends on the product size and structure. It should balance appearance, strength and silver weight.

4. Confirm Stones and Settings

The CAD should specify:

  • Stone material

  • Shape

  • Length and width

  • Quantity

  • Setting method

  • Stone orientation

  • Prong or bezel structure

A reference image may show a gemstone shape that is not commercially available in the required quantity. Before final approval, the factory should confirm whether the selected stones can be sourced.

Natural gemstones may also have color and pattern variation. Buyers can review our comparison of natural gemstones vs CZ for small-batch sterling silver jewelry.

Technician measuring a resin jewelry prototype before sample production

5. Check Every Connection Point

Connections are especially important for necklaces, bracelets, earrings and movable products.

Confirm:

  • Jump-ring size

  • Chain attachment position

  • Bail opening

  • Earring-post position

  • Hinge structure

  • Clasp connection

  • Whether moving parts have enough clearance

  • Whether the product will face forward when worn

A connection may look visually correct while being too thin, too small or placed at an angle that causes the product to turn.

6. Confirm Fixed, Adjustable and Size-Specific Structures

Changing an adjustable ring into several fixed sizes is not always a simple resizing exercise.

The factory may need to adjust:

  • Ring-arm curvature

  • Stone position

  • Decorative proportions

  • Side-stone spacing

  • Band thickness

  • Connection points

The buyer should confirm whether one CAD can support multiple sizes or whether separate files and molds are required.

7. Review the Estimated Weight

CAD software can provide an estimated metal weight, but the final physical weight may change after casting, polishing, stone setting and assembly.

The estimate is still useful for checking whether:

  • The product fits the target cost.

  • A pendant is too heavy for the selected chain.

  • A chunky design should use an open or hollow structure.

  • A ring is strong enough for its size.

  • Different design options can be compared.

The relationship between development work and project cost is explained in Jewelry CAD, Mold and Sample Fees Explained for New Brands.

8. Confirm the Logo and S925 Mark

Check the size and position of:

  • Customer logo

  • S925 stamp

  • Product code

  • Other required markings

Small jewelry may not have enough space for multiple markings. The logo must also remain readable after casting, polishing and plating.

Confirm whether the logo is raised, recessed or laser engraved.

9. Record Every Requested Change

Avoid approving changes only through scattered voice messages.

A clear revision record should show:

  • Previous version

  • Requested change

  • Updated dimensions

  • Updated stone details

  • Date of approval

  • Final approved version

Both the buyer and factory should refer to the same final CAD file.

Once the CAD is approved, the project can proceed through the jewelry sample order process.

What CAD Approval Does Not Confirm

Even a correct CAD cannot completely show:

  • Actual plating color

  • Surface polishing

  • Stone color

  • Finished weight

  • Wearing comfort

  • Clasp function

  • Movement

  • Overall hand feel

These items must be checked on the physical sample.

Use our jewelry sample to bulk production checklist before approving mass production.

Custom jewelry development from CAD design to mold casting and finished sample

Final Approval Questions

Before writing “CAD approved,” confirm:

  1. Are all dimensions correct?

  2. Have the front, side and back views been reviewed?

  3. Is the metal thick enough?

  4. Are the stones commercially available?

  5. Are all settings secure?

  6. Are connection points practical?

  7. Is the estimated weight acceptable?

  8. Are the logo and S925 mark positioned correctly?

  9. Are all ring sizes or variations covered?

  10. Is this the final version for mold production?

Final Thoughts

CAD approval is the point where a visual concept becomes a production instruction. Buyers should take time to confirm every measurable and structural detail before the mold and sample are made.

Dciya Jewelry supports design review, CAD development, mold preparation and physical sampling for original sterling silver jewelry. Contact our factory with your reference images, required dimensions and order quantity for an initial feasibility review.

Comments


bottom of page